The water, especially as salt or dirty, can penetrate the circuits of a telephone, so that short -circuit O corrosion. Also devices with certifications IP67 O IP68 They are not always immune: these acronyms indicate a limited time of fresh water (30 minutes to 1-1.5 meters deep), but seawater or long-term exposure can overcome these protections. Statistics indicate that 11% of smartphones die due to liquid damage, making this one of the most common problems after breaking the screen.
Acting quickly is fundamental. Every second delay increases the risk of permanent damage.
Also read: Check if an iPhone is damaged in the water
Compared to a few years ago, where every bathroom in the water has determined the end of the phone, today we can hope to restore the smartphone, even after a small bathroom, because many have waterproof certifications as seen in our guide Which smartphones can withstand water or divers.
However, it is better not to trust this “resistance” and act quickly as indicated below, to minimize the damage to the smartphone.
Immediate steps to save the phone
When a smartphone ends up in the water, the timeliness is everything. Here are the first steps to follow:
- Switch off the device: If it is still on, switch it off immediately to prevent short circuits. Press the buttons or try to turn it on is a mistake that can push water deeply.
- Remove accessories: Remove custody, SIM cardSD card and, if possible, the battery (now rare in recent models). These components can be dried separately.
- Dry the outside: Use a soft and absorbent cloth, such as a microfiber, gently to the body, display and doors. Don’t shake the phone because the water can reach the internal circuits.
Cleaning: management of seawater and other liquids
The cleaning It is a crucial passage, especially if the phone has fallen seawaterthat contains very corrosive rooms. The salt can be deposited on the circuits and form crystals that destroy the components over time. Contrary to what you think, it is not enough to dry the device: the Salini residues remain even after the evaporation of the water.
ForseawaterI know the phone should rinse along distilled water Or, in absence, fresh tap water. This step is controversial: many fear that adding water worse the situation, but leaving salt is much more harmful. Soak the device briefly in distilled water (no more than 10-15 seconds) and pat with a dry cloth immediately helps remove the salt. If the phone is exposed to sugar -containing liquids, such as juices or drinks, cleaning is equally important: sugars can create a sticky patina that attracts dust and harm the doors.
A common mistake is toseawaterTrust in the IP68 certifications. Many manufacturers leave out to indicate that these certifications only apply to fresh water, so that users remain unprepared. After rinsing, dry the gates carefully (USB, audio insers, speakers) with cotton sticks or suppressed suppressed air, but avoid hot blowers that can push the water deeper.
Drying: effective methods and myths to expel
After the first interventions, the goal is toResidual manity. A traditional method is to immerse the phone in an absorbent material, but not everyone is effective.
The myth of rice
Put the phone in a bowl with rice It is a popular, but not very efficient remedy. Studies show that rice slowly absorbs the humidity and can leave starch residues in the doors. It is better to avoid this method, despite its popularity.
The Silicagel solution
A better alternative is to use Silicagel Sachetswho often found in shoe or electronic boxes. Place the phone for 24-48 hours in an airtight container with different silicagel bags. This material is designed to absorb the humidity quickly and neatly. The bags can be purchased online Amazon.
Air drying
If you do not have a silicagel bags, leave the phone for at least 48 hours in a dry and well -genting environment. Avoid heat sources such as hairdresserOvens or radiators: Excessive heat can damage the circuits or malformation components.
In this way you can dry the different parts separately by spreading the spaces and avoiding as far as possible that the water penetrates the mobile phone. To dry empty slots, such as that of the SD card, you can use tissue paper to absorb water. I recommend it too Shake your mobile phone to all the water from the inside.
App to remove water from the speakers
A frequent problem after immersion is the audio filled in speakers. And ‘App that expels the water from the speakers with high -frequency soundsFree available for Android and iPhone, can help. Two valid and free options are:
- Sonic For iPhone: a simple app that shows showing on different frequencies to push the water out.
- Repair my speakers For Android: it works in the same way, with an intuitive and accessible interface also via browser.
These apps are useful, but do not solve internal damage. Test them after drying to check the functioning of the speakers.
Prevention: how you can avoid future accidents
Protecting the smartphone against future damage is easier than you think. Some strategies:
- Waterproof lids: By buying a waterproof cupboard You can have protection without sacrificing the design.
- Hermetic bags: Ideal for the sea, allows you to use the phone under water for photos or messages.
- Smartphone Robuust: Devices that are designed to resist falling and diving, perfect for those who are often at risk.
A bit of a suggestion is to prevent the phone in your pocket from keeping in damp environments, such as the bathroom, not in your pocket. The steam of a shower can cause damage that is comparable to a dive.
We can always read our guides for the theme of typical problems and repairs for the smartphone 8 Typical summer problems with smartphones by face one DIY repairs for smartphones and iPhones with guides to adjust the mobile phone.
#wet #telephone #cases #water #effective #solutions