How to use Arccos sensors at your golf clubs (Setup, couples and game improvement)

Arccos sensors are designed to transform your golf game by offering automatic shot tracking, in-depth analyzes and personalized club recommendations. Learn how to use and set Arccos sensors.

The sensors are small, lightweight devices that are attached at the end of your golf club handles. Once installed and linked to the ARCCOS app, they automatically detect any recording you make, record data such as distance and location and synchronize this information with your smartphone for real-time analysis.

On average, ARCCOS users lower their handicap with five shots in their first year of use

We have put together a step-by-step manual to help you get started, how you can use the Arccos sensors and how you can maximize the benefits of the technology to improve your game.

What are Arccos sensors?

The first things are first to understand what they are. Arccos sensors are innovative tracking devices that are designed to help golfers easily analyze and improve their play.

The sensors automatically register data for every recording you make, including position and distance, and send them to the ArcCos app for analysis.

Arccos then uses artificial intelligence and machine learning to give personalized recommendations, to follow obtained traces and determine your strengths and areas for improvement.

Arccos sensors cost and price

The regular selling price is $ 249.99 for a full set of Arccos Gen 4 Smart Sensors. The price with a discount during the sale can be as low as $ 174.99 for the set.

Individual sensors are priced at $ 17.99 per single sensor for new users.

The annual subscription is free for the first 12 months, including a year free with sensor purchase. The subscription costs are then $ 155.88 and automatically renew.

It can be purchased from brands such as Ping” Taylormade And Cobra When buying a set of irons or golf clubs.

How to set up Arccos sensors

The installation process takes less than 10 minutes and can be completed via the ArcCos app. To start with:

1. Outbox your sensors

Each set usually includes 14 sensors, one for each club, with a special sensor for your putter.

The completely black sensor is for your Putter-de Rest can be used at any other club.

2. Attach the sensors

First remove all stickers from the sensors. Turn every sensor in the hole at the end of the handle of your club until it is safe.

3. Return clubs to bag

After installing each sensor, place the club back in your bag to prevent cross-pairing errors during the setup

4. Start linking the sensors

Download the Arccos app from the relevant App Store and create an account or log.

You must ensure that Bluetooth, camera and microphone authorizations are switched on on your phone for the clutch process.

In the app, choose the option to select clubs manually to link. To link each club, get one out of the bag at the same time to prevent cross-pairing again.

Just keep the camera of your phone over the top of the sensor and the app will recognize it and assign it to the right club. Once accompanied, bring the club back to your bag before you go to the next.

If a sensor does not fit immediately, turn the sensor to the ground for 15 seconds and try again with good lighting.

5. Play your first round

You must keep your phone while playing in your front pocket to guarantee accurate shot detection, or use the Arccos -link or Apple Watch if you prefer not to wear your phone.

While playing, the sensors automatically detect each recording and send data via Bluetooth to your phone.

The app overlaps your recordings on a GPS card, follows distances and offers club recommendations using AI-driven Smart Caddy functions.

6. Analyze your performance

The app also offers in -depth statistics after each round, allowing you to identify areas to practice and follow progress over time.

An active Arccos membership is required for continuous access to analysis and smart Caddy function.

You will receive the first year of App -membership for free when buying a sensor set, but you have to renew when 12 months are over.

Use ArcCos sensors on multiple club sets

You can transfer sensors between sets or buy extra sensors. With the app you can manage and switch different club sets.

If you have a single set of Arccos sensors, you can physically move them from one set of clubs to the other. After you have exchanged the sensors, you must update the Arccos app to link the sensors with every club in the new set.

To keep all your tracking data together, just exchange the sensors and connect the clubs using the “Sensor Diagnostics” tool in the app.

To store data separately for each set, loosen the first set in the app and use “Add new clubs” to link your second set. Your first set appears as “unpaired clubs”; When you go back, you have to mate those clubs in the app again.