Adjusting Cobra OPTM Fairway Woods (Adjustment Guide)

Want to know how to adjust Cobra OPTM fairway woods to change loft and lie angles? We have a complete guide and adjustment table.

The Cobra OPTM woods are fully adjustable with a Hosel that gives you the ability to adjust the loft to increase or decrease your launch angle

The amount of adjustment you can make varies from brand to brand, but the step-by-step guide below will show you how to adjust the Cobra OPTM fairways woods.

Cobra OPTM Fairway Woods lofts

The Cobra OPTM Fairway wood are sold in three different models: the X, MAX and LS.

The OPTM

The OPTM MAX wood types are available in 3-wood (15.5 degrees), 5-wood (18.5 degrees), 7-wood (21.5 degrees) and 9-wood (24.5 degrees).

The OPTM LS wood types are available in 3-wood (14.5 degrees), 3-HF (16 degrees) and 5-wood (17.5 degrees)

Cobra OPTM X Woods specifications

Attic: 3-wood (15 degrees), 3-HF (16.5 degrees), 5-wood (18.0 degrees), 7-wood (21 degrees) and 9-wood (24 degrees)

Standard length: 41.5 to 43.25 inches

Standard lie: 56 degrees to 60.8 degrees

Adjustability: 4 degrees adjustable with the following options (13-17 degrees, 14.5-18.5 degrees, 16-20 degrees, 19-23 degrees and 22-26 degrees)

Cobra OPTM MAX Woods Specifications

Attic: 3-wood (15.5 degrees), 5-wood (18.5 degrees), 7-wood (21.5 degrees) and 9-wood (24.5 degrees)

Standard length: 41.5 to 43.25 inches

Standard lie: 58.5 degrees to 61.8 degrees

Adjustability: 4 degrees of adjustability with the following options (13.5-17.5 degrees, 16.5-20.5 degrees, 19.5-23.5 degrees & 22.5-26.5 degrees)

Cobra OPTM LS Woods specifications

Attic: 3-wood (14.5 degrees), 3-HF-wood (16 degrees) and 5-wood (17.5 degrees)

Standard length: 42.5 to 43.25 inches

Standard lie: 54 degrees and 58 degrees

Adjustability: 4 degrees of adjustability with the following options (12.5-16.5 degrees, 14-18 degrees & 15.5-19.5 degrees)

Adjusting the loft angle of Cobra OPTM Fairway Woods

There are a few simple steps you can take to adjust the loft angle of your fairway. All you need is an adjustment tool or a wrench to get started.

Here’s how to customize Cobra OPTM Fairway Woods:

1. Locate the screw on the sole of your Cobra OPTM Woods that secures the fairway head to the shaft.

2. Using the wrench, loosen the screw by turning counterclockwise.

3. Once the screw is fully loosened, you can rotate the adjustable hose to a lower cage or a higher cage depending on your preference. You will notice the loft figure you had the club set to and you can rotate the shaft to up to 33 other options.

The available options of the FutureFit33 hostel adjustment are:

Examples:

• Fight a slice: use upright reclining settings or closed facial angles (e.g. B1, C1 or C8) to promote a draw
• Fixing a hook: Use flatter lie settings or open face angles (e.g. A8, A7 or B6) to promote a fade
• Maximize distance / high launch: increase loft (go up on the map, e.g. F4 or G3)
• Windage/Low Launch Control: Use lower loft settings such as G3, G4, or F3

4. When you have rotated the hosel to the desired loft, slide the shaft back into your club head. Your new loft will be visible through the window at most clubs.

5. Replace the screw and tighten it clockwise with the wrench. When it is fully tightened, you will hear a crank that sounds like the club head is cracking. At this point the screw is tightened as much as necessary.

Each time you want to adjust the hutch, repeat this process.