I’ve been keeping an eye on the latest gear drops and ONOFF just released the details for their 2026 AKA lineup. If you know ONOFF, you know that the “AKA” (red) line is all about “automatic” forgiveness and distance. I haven’t had a chance to swing it yet, but looking at the spec sheets and the new technology they’ve packed in, it looks like this series is specifically targeting the exact issues I’m struggling with on the course.
Here’s what I see on paper and why I’m eager to get this one in the bag for a test drive.
The driver: a cure for the slice?
First off, the new Driver AKA 2026 looks like it was built as a fairway finder. They use this new “Beadless Cup Face” technology. In short, by removing the welds between the face and body, they presumably increased the area of rejection. In plain English? It sounds like the sweet spot is huge.
But what really struck me was the weighting. They used a lot of carbon in the head to save weight, and then redistributed that saving across two specific weight screws: one in the heel and one in the rear. That’s a classic recipe for a draw. As someone who fights a bit when I get tired on the back nine, having a driver who naturally wants to turn the ball over (or at least straighten it) sounds great.
They also added “Face Laser Milling” with a variable density pattern. It should help stabilize spin on off-center hits, especially in wet conditions. And if you look closely, they have a little ONOFF logo hidden in the milling pattern – I love little details like that.
Fairway Arms: the return of the 9-wood!
This is perhaps the most exciting part for me. For the first time in 10 years, ONOFF is bringing the W9 (9-wood) back to the AKA lineup. I’ve been saying that high loft woods are cheat codes for amateurs, so it’s great to see a major brand addressing this.
They split the technology here, which is smart:
- The “Monster” Forest (W3, W5): These use a titanium body and a tungsten sole. This is high-quality use of materials that is usually reserved for drivers. I expect these to launch high and spin low for maximum distance.
- The “Sniper” Forest (W7, W9): These switch to a Maraging Cup Face and Carbon Crown. The goal here seems to be dropping the ball gently onto the green rather than just purely rolling out.
And finally: adjustable sleeves! The AKA fairways now have the OTCS cover, so I can actually adjust the loft and lie. That was a feature missing from some previous “game improvement” forests, so it’s a huge upgrade.
Utility Wings: Filling the Gaps
The Utility Wings AKA 2026 now follows the forest all the way down to a U2. I don’t wear a 2-iron (who does?), but a 2-hybrid? That can be a serious weapon for long par 3s or escaping tight lies.
They’ve also added a weight screw to the sole for the first time in the utility line, pushing the center of gravity back for higher launch and increased traction. Combined with the new “Power Trench” (their signature sole groove), I hope this helps clean the ball off the grass, where I usually struggle with long hybrids.
Irons: “Direct repulsion” for thin shots
The irons look surprisingly sleek for a distance category. They shaved off the top blade and shortened the snout length slightly so they no longer look like spades.
The technical story here is the “Direct Repulsion Face” made from a new material called 4140PLUS. It makes for a thinner face, but what’s really cool is how they set it up to handle thin shots. They claim the rebound power on the lower part of the face has been significantly improved. Since 90% of my misses are thin shots that fall short, this can be a game saver.
They also pushed a heavy tungsten weight deep into the toe. This should lower the center of gravity even further, allowing the ball to be launched high despite the strong lofts that these modern irons usually have.
The secret weapon: Cross Balance technology
This is the feature that really makes ONOFF stand out to me. It’s called Cross Balance Technology (CBT).
Typically, as you add weight to the club head, the club feels heavier (the swing weight goes up). But with CBT you can alternate weights between the head and the head end of the handle. This allows you to change the balance of the club without changing the overall weight.
Ideally, this means I can make the clubhead feel lighter to increase my swing speed, or heavier so I can feel the clubhead during the takeoff, all without ruining the overall mass of the club. It’s a level of tinkering you normally only get from a professional installer, but it’s built right into the stock options.
Frequently asked questions
The ONOFF Driver AKA 2026 features a ‘Beadless Cup Face’ made from high-quality titanium to increase the repulsion area. It also features the ‘Power Trench’ to maximize energy transfer and a tensile weight structure (heel and back weights) to help golfers keep the club face straight and prevent slicing.
Cross Balance Technology (CBT) is a unique adjustable weight system found in the AKA 2026 series. Allows golfers to interchange weight screws between the club head and grip end. This allows you to adjust swing balance (how heavy the clubhead feels) without changing the overall weight of the club.
Yes. For the first time in 10 years, the ONOFF AKA Fairway Arms series includes a W9 (9 wood). This high-loft wood is designed to help players target greens with a high ball flight and a soft landing.
The AKA 2026 irons use a ‘Direct Repulsion Face’ made from a new material called 4140PLUS. This structure, combined with an evolved Power Trench, is specifically designed to improve rebound performance at the bottom of the face, reducing distance loss on thin shots.
Yes. The Driver, Fairway Arms and Utility Wings in the AKA 2026 series all feature the OTCS adjustable sleeve system. This allows golfers to fine-tune the loft, lie and face angle. They also feature interchangeable weight screws for swing weight adjustment.
#ONOFF #AKA #series